About 3,000 to 5,000 cotton warp threads are used on the fixed frame pedal floor loom.
The technology is simple. The fabric created is complex.
The floor loom is faster. Weavers can produce a rebozo in about a week using this loom. It takes three months or more to make a rebozo on the back strap loom.
Because fewer warp threads are used on the floor loom, the cotton threads can be thicker and the finished cloth might be coarser.
As you might imagine, the cost for a rebozo made on a back strap loom is much more than one woven on a pedal loom. Except for the rebozos woven by Jesus Zarate! What do rebozos cost? From 400 to 16,000 pesos.
Would you work six months to earn $800 USD?
The pattern can be more blurred and not as detailed as those created on the back strap loom. Except for the rebozos woven by Jesus Zarate!
There are fourteen different steps required to make an ikat rebozo. The most difficult and time-consuming part is the preparation of the threads before they are dressed on the loom.
The weavers we met all repeated that the actual weaving is the simplest part of the process.
Once the cords are marked in ink with the pattern, each mark is hand tied. The cloth will then be dipped in the dye bath. It is then washed and dried. The knots are cut and the pattern emerges on the warp thread, ready to be threaded on the loom.
For rebozos with multiple colors, they can be hand-dipped in the dye pot or the part that is already colored will be tied off so it does not absorb the new color.
The loom might be considered low technology, but it is a complex system for making cloth. Today, industrial cloth is made totally by machine. We are interested in the hand-made process.
Knotting the rebozo can take equally as long as weaving it — three months or more, depending on intricacy. We know one enpuntadora who takes a year to tie a complex fringe.